Security window film is a thick, clear polyester film that holds broken glass together. It does not make a window unbreakable. It slows forced entry and keeps glass shards from flying. Thickness matters: 3M’s Safety S70, S80 and S140 films are 7, 8 and 14 mil thick, with break strengths of 175, 200 and 350 lbs per inch. Installed security film had a median range of $8 to $20 per square foot across 7 price guides.
We did not break any glass or install film for this guide. We went through 3M’s technical data sheets, retail listings and published price guides on 18 November 2026. No film maker or installer pays us, and this page has no affiliate links.
Security Window Film: Quick Answers
Does security window film stop break-ins?
It delays them. The film keeps broken glass in place, so an intruder has to keep striking to make a hole. With an attachment system, the pane is also harder to push out of the frame. It will not stop a determined attacker indefinitely, so pair it with locks and alarms.
What thickness of security film do I need?
For accidental breakage and flying glass, 7 to 8 mil safety film is common. For break-in delay, 14 mil security film or thicker is typical. 3M’s S140 is 14 mil with a break strength of 350 lbs per inch, versus 175 lbs for the 7 mil S70.
How much does security window film cost?
Installed security film had a median range of $8 to $20 per square foot across 7 guides. Thicker film and frame attachment cost more: American Window Film lists $9 to $15 for film alone and $14 to $18 with wet-glaze attachment.
Is security film the same as hurricane film?
Hurricane film is usually thick safety film sold for storm use. It helps hold glass fragments together after debris impact. It is not the same as code-approved impact glass or shutters, so check your local building code.
Can I install security film myself?
You can install thin safety film on small panes. Thick security film is stiff and hard to squeegee without bubbles, and attachment systems need special tools. For large windows and break-in protection, a professional install is the better choice.
Security Film vs Safety Film
The terms overlap. Safety film is usually thinner, around 4 to 8 mil, and is meant to hold broken glass together after an accident or storm. Security film is thicker and aims to delay a break-in.
Both work the same way. The film bonds to the glass with a strong adhesive. When the glass breaks, the shards stick to the film instead of falling or flying.
What changes with thickness is how much force the film can absorb. A thicker film takes more blows before a hole opens.
3M Safety Film Specs Compared
| Film | Thickness | Break strength (lbs/in) | Visible light | Extra test standards listed |
|---|---|---|---|---|
| 3M Safety S70 | 7 mil | 175 | 86% | ANSI Z97.1-2015, GSA-TS01-2003 |
| 3M Safety S80 | 8 mil | 200 | 86% | adds ASTM F2912 |
| 3M Safety S140 | 14 mil | 350 | 85% | adds ASTM E1886, E1996 |
All three are interior films with a tensile strength of 25,000 psi and UV transmission under 1%, per the data sheets. Doubling thickness from 7 to 14 mil doubled break strength from 175 to 350 lbs per inch. The table with links is on our film specs data page.
A listed test standard is not a rating for your window. Results depend on the glass, the frame and how the film is attached. Ask the installer which tested system matches your windows.
Does Security Window Film Stop Break-Ins?
It slows them. Film keeps the glass in one sheet, so a burglar has to keep hitting the same pane to make a hole. That takes time and makes noise.
Film alone has a weak spot: the edge. A pane can be pushed out of the frame in one piece. Attachment systems fix this by bonding the film to the frame.
American Window Film lists smash-and-grab delay as a main use for 8 to 14 mil film on storefronts. For home security, pair the film with good locks and lighting.
Attachment Systems
Daylight application. The film stops just short of the frame. This is the cheapest option and works for accidental breakage.
Wet-glaze. A structural silicone bead joins the film to the frame. American Window Film prices this at $14 to $18 a foot, versus $9 to $15 for film alone.
Mechanical attachment. Metal strips screw the film edge to the frame. It is the strongest option, and TP Window Film says security film with a frame attachment system sits at the higher end of its price range.
Window Security Film for Homes vs Storefronts
Window security needs differ by building. At home, the common risks are a ball through a patio door, a storm, or a burglar at a ground-floor window. A clear safety film of 7 to 8 mil handles glass breakage from accidents. For window security against entry, most installers move up to 14 mil or thicker film on doors and low windows.
Storefronts face smash and grab theft, where someone breaks the display glass, grabs goods and runs. Here the goal is a few extra minutes. American Window Film lists 8 to 14 mil safety security window film at $9 to $18 a foot for ground-floor storefronts and public buildings. A 14 mil security film with a frame attachment gives the most delay.
Security window films also help with impact protection for people. Film keeps glass shards from flying into a room, which matters in any room where people sit near the glass. It also blocks UV, since the 3M films list UV transmission under 1%.
What security film will not do is replace good window security basics. Good locks and alarms still matter, and laminated glass may suit the highest-risk spots. Ask an installer to walk the building with you and rank the weakest openings first. Our installer guide lists the main dealer locators.
Security Window Film Cost
| Source | Segment | Security film ($/ft² installed) |
|---|---|---|
| Angi | Residential | $8 to $20 |
| This Old House | Residential | $8 to $20 |
| Dalo Glass Tinting | Residential | $12 to $20 |
| LeWolf Tint Solutions | Residential | $14 to $22 |
| American Window Film | Commercial | $9 to $18 |
| AZ Window Tint | Commercial | $8 to $20 |
| Shadow Ridge Tinting | Commercial | $8 to $20+ |
The median range across the 7 guides was $8 to $20 a foot. Thickness and attachment explain most of the spread. Our window film cost guide compares security film with other film types.
DIY safety film exists. Home Depot sells a Gila Safety and Security film for doors and windows, but the listing does not state a thickness. Thick film is hard to squeegee flat, so large panes are a job for an installer.
Security Film vs Tempered and Laminated Glass
Tempered glass is about four times stronger than regular glass and breaks into small cubes. Laminated glass has a plastic layer between two panes, so it stays in one piece when broken. Security film adds a similar plastic layer to the inside face of existing glass.
Film costs far less than new glass. American Window Film puts replacement of commercial insulated glass units at $80 to $250 a foot. Security film runs $8 to $20.
Film is not a full substitute for laminated glass in code-required spots. Check local rules before you rely on film to meet a safety glazing code.
Hurricane and Storm Use
Hurricane film is a marketing name for thick safety film. The S140 data sheet lists the ASTM E1886 and E1996 debris test methods. Listing a test method is not the same as a code-approved hurricane rating.
In storms, film helps keep glass fragments in the frame after impact. It does not stop wind pressure from pushing out the whole pane. In hurricane zones, check your building code for approved shutters or impact glass.
Common Mistakes With Security Film
Buying on thickness alone. A thick film without an attachment can still let the whole pane fall in. Ask how the film edge is held.
Skipping the glass check. Some double-pane and tinted glass has limits on film. A thick film that absorbs heat can stress the glass, so ask whether the maker approves the film for your window.
Expecting a rating you did not buy. A data sheet that lists a blast or debris test method shows how the film was tested. It is not a certificate for your window. If you need a rating for insurance or code, ask for the tested system report.
Ignoring the warranty. Get the film name and mil rating in writing, along with the length of the film and labor warranty.
How to Choose Security Window Film
- Define the goal: accidental breakage, storm debris or forced entry.
- Pick thickness. 7 to 8 mil suits accidental breakage; 14 mil or more suits break-in delay.
- Ask for the attachment system and its tested results on a frame like yours.
- Get the film name, mil rating and warranty in writing.
What Changed in Security Window Film in 2026
Data sheets now list blast and debris tests. The 3M Safety S80 sheet lists ASTM F2912 for airblast loads. The S140 sheet lists ASTM E1886 and E1996, the hurricane debris test methods.
Clear film stays clear. 3M lists visible light transmission of 86% for S70 and S80, and 85% for S140, on clear quarter-inch glass.
Attachment raises the price. American Window Film quotes $9 to $15 a foot for film alone. Anchoring the film to the frame with wet-glaze silicone raises that to $14 to $18.
Thicker home film costs more. LeWolf Tint Solutions in Houston lists 8 to 15 mil safety film at $14 to $22 a foot.
Bottom Line: Is Security Window Film Worth It?
Security window film is worth it when you want broken glass to stay in the frame and a break-in to take longer. Choose 7 to 8 mil film for safety, and 14 mil or thicker film with a frame attachment for security. Expect $8 to $20 a square foot installed. Ask for the film’s data sheet and the tested attachment system before you sign.